Tink's Superior Auto Parts – NAPA Auto Parts

Lug Nut Removal and Wheel Tips and Tricks

Lug Nut Removal and Wheel Tips and Tricks

Lug Nut Removal and Wheel Tips and Tricks

https://commons.wikimedia.org/wiki/File:Car_hub_cotter_pin.jpg

One of the most frustrating things about having a flat tire is discovering your spare tire is also not in good shape. But even if your spare is in usable, there is another problem you may encounter: lug nuts or a wheel that simply won’t loosen. And, if you can’t loosen either, then you won’t be able to change the tire.

The following lug nut removal tips and tricks will help you get the job done and send you quickly on your way.

Lug Nut Basics

Lug nuts are what hold a wheel to threaded studs and connect to the axle. Securely tightened lug nuts are the best insurance for preventing a wheel from loosening, which can have disastrous consequences if it occurs.

Passenger vehicles usually come with one of three lug seat types: conical/tapered, ball/radius or flat. If you make changes to your wheels after acquiring your vehicle, such as choosing aftermarket alloy wheels, new hardware may be required.

If you have aftermarket wheels it’s important to keep an extra set of lug nuts in your trunk, or in some other storage compartment, in the event you use a factory-supplied wheel and tire. Usually the spare can only be fitted with the original equipment lug hardware.

Lug Nut Removal Tips and Tricks

To begin, carefully follow your car’s wheel removal instructions, typically found in the owner’s manual or on a sticker located in the vicinity of the spare tire.

Snow, salt and rust can take a toll on your car, especially on the lug nuts, causing them to stick. If the lug nuts are still stuck even after repeating the prescribed removal pattern, then you’ll need to use a wire brush to remove all visible rust off the threads. That step alone is usually enough to loosen things up and allow you to continue with your lug nut removal.

What If the Wheel is Stuck?

Another problem you may encounter after removing the lug nuts is a wheel stuck in place. Over time, a wheel and the hub it fits around can become fused, making it more difficult to remove the wheel.

In this situation, it’s recommended that you loosen the lug nuts just a little, or about one-quarter of a turn (do NOT remove the lug nut). Next, get behind the wheel of the car and drive it for 10 feet before stopping suddenly. Then put the transmission in reverse and slam on the brakes once you have traveled 10 feet.

The back and forth motions along with suddenly stopping your car each time should have the intended effect of loosening your wheel. Of course, you need to follow each of the other steps related to changing a tire before you complete your work.

Get Ahead of the Problem

You can also get proactive and prevent future problems by checking for corrosion in two places around the wheel: on the outside of the hub protrusion as well as the inside of the hole in the wheel.

Remove rust by applying sandpaper to the affected area, then remove the wheel. Next, generously cover both surfaces in wheel bearing grease before returning the wheel to its proper place. Do this twice per year and you should avoid a repeat of the problem.

For more information on lug nut removal, chat with a knowledgeable expert at your local NAPA AUTO PARTS store.

Photo courtesy of Wikimedia Commons

The post Lug Nut Removal and Wheel Tips and Tricks appeared first on NAPA Know How Blog.


Source: NAPA Know How

Leave a Reply

Your email address will not be published. Required fields are marked *