If something is wrong with your car, you definitely want to know about it. Still, the sudden and unexpected illumination of the check engine light can create a unique sense of dread. Our fears aside, the car is trying to tell us that something isn’t right, and we’d do well to pay attention when the light comes on. But what if you find your check engine light flashing? Is that any better, or is it worse?
Purpose of the Check Engine Light![check_engine_MIL_warning_light]()
Your car has a system of sensors monitoring different components and activities that’s in constant contact with the vehicle’s onboard computer. The computer analyzes signals from the sensors to make any necessary changes via actuators in the system. When something is wrong that it cannot correct, it will let you know by illuminating a light on the dash.
The light could turn on due to something specific, like a flat tire or low coolant, but there are a number of engine problems that will show up under the catch-all “check engine” light. When this happens, the computer logs a fault code in its memory, which can be accessed using an OBD II scanner. Many shops will run this scan for you, but it’s also pretty straightforward to purchase a scanner and pull the codes on your own. Note that just having a code in hand doesn’t mean you’ve identified the underlying issue. A code can help point you in the right direction, but more diagnostic and repair legwork will likely be needed.
Solid Light vs. Flashing Light
Sometimes a solid check engine light will turn on for something of less consequence, like a loose gas cap, but more often it’s due to something more serious than that, and you simply won’t know what the cause is unless you get a scan. Be sure to get a scan as soon as possible so you can start figuring out whether you have a serious problem or not.
A flashing check engine light is especially meant to get your attention and likely points to something that cannot wait. In fact, if your check engine light is flashing, you may want to consider changing your plans and driving to a mechanic immediately. Your vehicle is making no promises of getting you to your destination when that light’s flashing, so you may even need a tow.
Check, Check
A flashing check engine light often indicates a misfire, or that at least one of your cylinders isn’t going through the combustion cycle properly. This could mean that you’re building up a lot of unburned fuel and excess heat. Aside from being a firestarter recipe, this can also cause serious damage to costly components, such as the catalytic converter, if it continues. While a flashing check engine light might seem like a small problem, it can quickly turn into a larger one if it goes ignored.
One of the best ways to avoid getting to that point is to commit to regular maintenance checkups. Making sure spark plugs and wires are good, changing fuel filters, and checking that injectors aren’t clogged can all help to prevent misfires.
Just like service lights and solid engine lights, a flashing check engine light has codes associated with it that can be accessed with a scanner. You can use a scanner to get the codes for diagnostic purposes, but don’t run the vehicle any longer than you have to, or you might risk more serious damage. The safest option is to see a mechanic as soon as you can. They should be able to diagnose and repair the issue so you can get your car back on the road.
Check out all the diagnostic tools and equipment available on NAPA Online, or trust one of our 17,000 NAPA AutoCare locations for routine maintenance and repairs. For more information on a check engine light flashing, chat with a knowledgeable expert at your local NAPA AUTO PARTS store.
Photos courtesy of Flickr.
The post What Does a Check Engine Light Flashing Mean? appeared first on NAPA Know How Blog.
Source: Maintenance